Midland MicroMobile 15W GMRS Two-Way Radio with Integrated Control Microphone



amzn.to/3fBYmTH – Midland MicroMobile 15W GMRS Two-Way Radio with Integrated Control Microphone

Midland MicroMobile 15W GMRS Two-Way Radio with Integrated Control Microphone
Installed this radio on the inside roof of my 2017 RZR S 900 to help keep it out of the elements. Had to drill a couple of extra holes in the bracket to make it work but it was easy to do.
Radio is super simple to set-up and use and the range is more than adequate to communicate with the rest of the UTV group we ride with. Bracket and connections make it easy to remove when it comes time for a pressure wash.
Went with this instead of a handheld so I dont have to worry about batteries…

Installed this radio on the inside roof of my 2017 RZR S 900 to help keep it out of the elements. Had to drill a couple of extra holes in the bracket to make it work but it was easy to do.
Radio is super simple to set-up and use and the range is more than adequate to communicate with the rest of the UTV group we ride with. Bracket and connections make it easy to remove when it comes time for a pressure wash.
Went with this instead of a handheld so I dont have to worry about batteries and wont forget it at home.
Handy little radio, I love how all of the controls, display, and a speaker are integrated into the very beefy feeling handmic as it can make for a very clean custom install.
For those out there looking to do a custom setup and remotely mount the “guts box” somewhere hidden or just farther away than the Mic cable can reach, breathe a sigh of relief as the handmic cable connection is a standard cat5 type.For my install I mounted the handmic on the dashboard with a black plastic aftermarket Mic hanger (did the same for my other 2 radios because I wanted it all to match and look like less of an afterthought) and for the cable extension I used a double female ended rj45 socket mounted in a triple hole wall plate (just like you would see in an office lan network) and flush mounted the wall plate into the dash panel with some patient dremel work and plastic weld epoxy, from there I ran a 15 cat5 cable along the vehicle wire harness down the passenger side rocker panel all the way to the indentation of the quarter panel trim plastic piece where i mounted it using the supplied slide in bracket mounted with a set of small bolts I supplied, power comes from (i did cut off the cigarette socket plug, and install a pair of ring terminals on the wire ends) a marine fuse box I mounted under the passenger seat and supply power to via a 1/0 gauge welding cable run up to the battery.Bottom line is this radio makes it easy to perform a clean custom install without “guts boxes” taking up passenger space and being an eyesore in the cabin.
The MXT275 is the latest addition to the Midland Micro Mobile GMRS 2-way radio line up, with an all in one handset that allows for numerous mounting options.

amzn.to/3fBYmTH – Midland MicroMobile 15W GMRS Two-Way Radio with Integrated Control Microphone

View at DailyMotion

You May Also Like